Product name: CIR60 60mm Low Air Pressure DTH Hammer Button Bits For Stone
Drilling
Product category: DTH drill tools
Matched hammer: Hammer CIR60
Diameter: 60mm
KINGDRILLING DTH button bit description:
Down-the-hole hammers are used in conjunction with KINGDRILLING
hammer bits to drill holes through a variety of rocks. Drill hammer
bits are made with a spline drive to enable bit rotation in the
ground when used with DTH hammers. Drill bits can drill a variety
of hole diameters since they come in a variety of sizes and types.
To give you a precise balance between penetration capability and
bit life, our range of Down the Hole (DTH) bits is made using
premium materials.
KINGDRILLING Low air pressure DTH button bit shank technical parameters:
| Drill Bit | Bit Dia.(mm) | Bit Dia (Inch) | Gauge Buttons | Spline Num. | Shank |
 | 50 | 1 31/32 | 3×φ10 | 4 | CIR50 |
| 55 | 2 5/32 | 3×φ10 | 4 | CIR50 |
| 60 | 2 23/64 | 3×φ12 | 4 | CIR60 |
| 65 | 2 9/16 | 4×φ12 | 4 | CIR65 |
| 76 | 3 | 5×φ12 | 4 | CIR70 |
| 90 | 3 35/64 | 6×φ14 | 6 | CIR90 |
| 100 | 3 15/16 | 6×φ14 | 6 | CIR90 |
| 105 | 4 1/8 | 6×φ14 | 6 | CIR90 |
| 110 | 4 21/64 | 6×φ14 | 6 | CIR90 |
| 120 | 4 23/32 | 6×φ14 | 6 | CIR90 |
| 130 | 5 1/8 | 7×φ14 | 6 | CIR90 |
| 110 | 4 21/64 | 6×φ14 | 6 | CIR110 |
| 120 | 4 23/32 | 6×φ14 | 6 | CIR110 |
| 125 | 4 59/64 | 7×φ14 | 6 | CIR110 |
| 130 | 5 1/8 | 7×φ14 | 6 | CIR110/CIR130 |
| 140 | 5 33/64 | 8×φ14 | 6 | CIR110/CIR130 |
| 150 | 5 29/32 | 8×φ14 | 6 | CIR110/CIR130 |
| 150 | 5 29/32 | 9×φ16 | 6 | CIR150 |
| 165 | 6 1/2 | 9×φ16 | 6 | CIR150 |
| 175 | 6 57/64 | 9×φ16 | 6 | CIR150 |
| 185 | 7 9/32 | 9×φ16 | 6 | CIR150 |
| 200 | 7 7/8 | 9×φ16 | 6 | CIR150 |
| 175 | 6 57/64 | 9×φ16 | 6 | CIR170 |
| 185 | 7 9/32 | 9×φ16 | 6 | CIR170 |
| 200 | 7 7/8 | 9×φ16 | 6 | CIR170 |
| 220 | 8 21/32 | 12×φ16 | 6 | CIR170 |
| 250 | 9 27/32 | 12×φ16 | 6 | CIR170 |
Order Guide: Shank+ Head diameter+Face design+Button shape
Kingdrilling DTH bit feature:
1. Compatible with every main design of drill bit shank
2. The concave, flat, and convex drill bit faces
3. A range of carbide designs and grades to function in different
types of ground
4. A unique method of heat-treating for enhanced hardness and
durability
5. Local production to cut lead times
Kingdrilling rock drill tools application:
1. Mining and quarrying drilling
2. Mining exploration drilling
3. Piling and foundation drilling
4. Water well drilling
5. Geothermal drilling
6. Horizontal directional drilling
FAQ:
1. what is a button bit?
Tungsten carbide inserts rotate within the cones of button bits,
also known as roller cones. Though producers still produce two cone
and one cone bits, tricone, or three cone bits, are the most widely
used.
2. How can one drill through large stones?
Drill for a minute while applying moderate pressure. Allow the
drill to do the work; do not press the bit into the boulder. After
taking the bit out of the hole, let it cool in the water pitcher.
To cool the rock and remove dust, lightly mist it with water.
3. What about standard packaging?
A: If there is no special packing demand, we will take it as our
normal packing. First in small carton, and then put in the bigger
carton together to make sure goods completed.
4. How to check the product are the exact one you want?
A: If possible, please attach one reference picture to avoid any
misunderstanding or any links from our website for a better
understanding.
5. How to choose the suitable head face of the DTH drill bit?
Concave:
Suitable for all kinds of formation, especially for deep well
drilling, perpendicularity of the hole is wonderful.
Convex:
Suitable for the formation of moderate hardness stratum, drilling
efficiency is good, borehole perpendicularity is moderate.
Flat:
Suitable for special hard formation stratum, especially for
fracture, crack spacing and complex formation drilling effect is
very good, has the good perpendicularity of the borehole.
More information:
